1,000+ 5 star ratings on Shopper Approved
     Home > AtlasIED -> AtlasIED Amplifiers -> AtlasIED Power Amplifiers

    AtlasIED Power Amplifiers

    Items: 1 - 20 of 27 1 2 >
    Sort by:

    AtlasIED TSD-ML22VCA

    2x2 Mic/Line Preamp and VCA
    • Description: 2 x 2 Mic/Line Preamp with VCA Control
    • Chassis Color: Black
    • Chassis Material: Aluminum
    • Inputs
    • Type: Qty 2, Balanced Mic or Line Selectable

    AtlasIED TSD-ML11

    1x1 Mic/Line Pre-Amplifier
    • Description: 1 x 1 Mic/Line Preamp
    • Chassis Color: Black
    • Chassis Material: Aluminum
    • Inputs
    • Type: Qty 1, Balanced Mic or Line Selectable

    AtlasIED AL2450

    Integrated Infrared Receiver and Amplifier
    • System
    • Type: Power Amplifier
    • Power Supply Type: Switch Mode - Wide Range - PFC
    • Amp Topology: Class D
    • Number of Fixed Inputs: 6

    AtlasIED TSD-PA122G

    12W x2 @ 4-Ohm, 2-Channel Power Amplifier
    • Description: 2 x 12W Global Audio Amplifier
    • Chassis Color: Black
    • Chassis Material: Aluminum
    • Power Output: 12W @ 4 x 2 CH, 6W @ 8 x 2 CH, 24W 8 Bridge
    • Inputs

    AtlasIED TSD-PA252G

    25Wx2 @ 4Ohm Two-Channel Power Amplifier
    • Description: Two-Channel Amplifier
    • Load Rating: 8 - 12W x 2 CH / 4 - 25W x 2 CH
    • Chassis Color: Black
    • Chassis Material: Aluminum
    • Inputs

    AtlasIED DPA-102PM

    2-Channel x 100W, 4Ohm Networkable Pole Mount Power Amplifier
    • Power Output: 50 Watts per Channel @ 8Ohm / 100 Watts per Channel @ 4Ohms
    • Factory Ship Settings: Two CH 4Ohms
    • Front Panel Levels: Active
    • DSP: Set to Flat and 0dB

    AtlasIED CP400

    Dual-Channel, 400W Commercial Power Amplifier
    • Direct Power Out: 8 Ohms, 1kHz, 0.1% THD, 160 Watts x 2 / 4 Ohms, 1kHz, 0.1% THD, 240 Watts x 2 / 2 Ohms, 1kHz, 0.1% THD, 270 Watts x 2
    • Bridged Mono: 8 Ohms 500 Watts, 1kHz, 1% THD
    • Bridged Mono: 4 Ohms 600 Watts, 1kHz, 1% THD

    AtlasIED CP700

    Dual-Channel 700W Commercial Power Amplifier
    • Dimensions: Height 5 3/16" (13 cm)
    • Width 18 7/8" (48 cm)
    • Depth 16 7/8"
    • (42 cm)
    • Frequency Response: 30Hz - 50kHz

    AtlasIED HPA602

    Dual-Channel, 600W Commercial Amplifier
    • Configurations
    • 2 x 300 Watt 70V
    • 2 x 300 Watt 100V
    • 2 x 300 Watt 8
    • 2 x 300 Watt 4

    AtlasIED HPA1302

    Dual-Channel, 1300W Commercial Amplifier
    • Configurations:
    • 2 x 650 Watt 70V
    • 2 x 650 Watt 100V
    • 2 x 650 Watt 8
    • 2 x 650 Watt 4

    AtlasIED HPA2602

    Dual-Channel, 3200W Commercial Amplifier
    • Input Quantity: 2 Balanced Inputs, Expandable to 4
    • Input Type: Balanced
    • Input Impedance: 20KOhms (Balanced) 10KOhms (Unbalanced)
    • Input Sensitivity: 775mV / 1.0V / 32dB (Selectable)
    • Input Connectors Type: 3.5mm Euro block

    AtlasIED PA40G

    Single Channel, 40W Power Amplifier with Global Power Supply
    • Power Output
    • PA40G: 40W @ 70.7V (125Ohms), 40W @ 100V (250Ohms)
    • PA60G: 60W @ 70.7V (83Ohms), 60W @ 100V (166Ohms)
    • Frequency Response: 50Hz - 20kHz
    • THD+N: 0.5% or Less @ 1kHz, Rated Output

    AtlasIED PA60G

    Single Channel, 60W Power Amplifier with Global Power Supply
    • Power Output
    • PA60G: 60W @ 70.7V (83Ohms), 60W @ 100V (166Ohms)
    • Frequency Response: 50Hz - 20kHz
    • THD+N: 0.5% or Less @ 1kHz, Rated Output
    • Sensitivity Line Input: 500mV (600Ohms)

    AtlasIED PA1001G

    Single Channel 100W Pole Mount Amplifier
    • Power Output: 100 Watts @ 70.7V
    • Harmonic Distortion: 0.002
    • Frequency Response: No Hi-Pass Filter: 30Hz 20kHz ( 3dB)
    • Hi-Pass Engaged: 100Hz 20kHz ( 3dB)
    • Signal to Noise Ratio: -100dB Below Rated Output (A-Weighted)

    AtlasIED PA601

    Single-Channel, 60W Power Amplifier
    • Power Output
    • Max. Average Power: @ 50Hz-20kHz with .5% THD (10-80kHz filter)
    • 8Ohms, 1kHz, 0.5% THD 60W RMS
    • Transformer Outputs

    AtlasIED HPA4202

    Dual-Channel, 4800W Commercial Amplifier
    • Input Quantity: 2 Balanced Inputs, Expandable to 4 via Accessory Card
    • Input Type: Balanced
    • Input Impedance: 20KOhms (Balanced) 10KOhms (Unbalanced)
    • Input Sensitivity: 775mV / 1.0V / 32dB (Selectable)

    AtlasIED TSD-PA20VG

    20W Mono 4Ohm/25V/70.7V/100V Power Amplifier
    • Description: 1 x 20W Global Commercial Amplifier
    • Chassis Color: Black
    • Chassis Material: Aluminum
    • Power Output: 20W @ 4Ohms, 10W @ 8Ohms, 20W @ 25V, 70.7V, 100V Loads

    AtlasIED TSD-PA10VG

    10W Mono 4Ohm/25V/70.7V/100V Power Amplifier
    • Description: Mono Commercial Amplifier
    • Chassis Color: Black
    • Chassis Material: Aluminum
    • Power Output: 10W @ 4Ohms, 5W @ 8Ohms, 10W @ 25V = 62Ohms, 70V = 490Ohms, 100V = 1000Ohms Loads

    AtlasIED HPA-DAC2

    Dante Accessory Card for HPA Amplifiers
    • Description: 2 input Dante receiver card for the HPA Series amplifiers
    • Connection: Single RJ-45
    • Cable Quality: CAT-5
    • Gain Settings: 0dBFS = 20dBu & 0dBFS = 10dBu PCB shunt selectable
    Items: 1 - 20 of 27 1 2 >
    Sort by:
    Customer Reviews
    Conference Room AV
    1775 W. State St. #189
    Boise, ID 83702
    Toll Free: (888) 999-3759
    Fax: (888) 955-1788
    Shopping
    Table Boxes
    Floor Boxes
    HDMI Adapters
    Pop Up Outlets
    All Products
    About Us
    Audio Video Distribution
    Customer Reviews
    Installation Request
    Contact Us
    888-999-3759 - ConferenceRoomAV.com 2024 ©