|
|
|
|
Liberty AV IPEX1001
DigiIP 1000 Series AV/IP Encoder
- Distribute, route, and switch 1080P HDMI signals over a standard 1Gbps network switch from unlimited sources to up to 50 decoders
-
No processor required. ID, setup, and control all encoders &
- decoders using an interactive app
|
Liberty AV IPEX1002
DigiIP 1000 Series AV/IP Decoder
- Distribute, route, and switch 1080P HDMI signals over a standard 1Gbps network switch. Up to 50 decoders and unlimited encoders can be used per system
-
No processor required. ID, setup, and control all encoders &
- decoders using an interactive app
|
Liberty AV IPEX2201
DigitalinxIP 2200 Series AV/IP Encoder
- Transmits HDMI video and audio over 1Gb network infrastructure using H.264 / 265 encoding with a data rate up to 30 Mbps
-
Supports video signals up to 1080p@60 Hz
-
An analog audio output port de-embeds the audio from the HDMI content, while still streaming the audio with the video content
|
|
|
Liberty AV IPEX6002
DigiIP 6000 Series SDVoE Decoder
- Fully Routable zero latency HDMI 2.0 signals up to 4K60 4:4:4 over standard 10GbE Network
-
Simple low cost SDVoE design for AV routing where no scaling or video processing is required
-
Compatible with all DigiIP 6000 series SDVoE endpoints
|
Liberty AV IPEX6001
DigiIP 6000 Series SDVoE Encoder
- Fully Routable zero latency HDMI 2.0 signals up to 4K60 4:4:4 over standard 10GbE Network
-
Simple low cost design for AV routing in areas where no scaling or video processing is required
-
Fully compatible with all DigiIP 6000 series SDVoE endpoints
|
|
|
|
|
Liberty AV IPEX5101UD-WP
DigiIP 5100 Series Wall Plate AV over IP Encoder w/ PoE
- Fully routable 2 Gang 2 input Wall Plate Format encoder over 1Gbps network
-
Primary inputs include HDMI &
- USB-C. Input labeled "USB-C" is a full featured input supporting video via ALT-DP, USB data, and power when optional power supply is used. The USB-C port labeled "USB Host" is for USB data only and is to be used with the HDMI input
|
|
|
|
|
|
|
|
|
|
|
