WyreStorm NHD-100-RX
NetworkHD 100 Series AV Over IP Decoder
Part #: NHD-100-RX
This product has been discontinued
For further information and alternative products, please call us at 888-999-3759 or click here to contact us.
Top NHD-100-RX Specifications
- Inputs: 1x LAN (PoE) 8-pin RJ-45 female | 10/100Base-T / 1x Audio Out: 3-pin Phoenix
- Outputs: 1x HDMI In 19-pin HDMI type A female
- Audio Formats: 2ch PCM
- Output Video Encoding: H.264/MPEG-4 AVC
"Very nice folks to work with. Quick and good information"
-Jeff A.
-Jeff A.
Contact a product specialist!
Proudly supporting our customers since 2008
Description
Wyrestorm's NHD-100-RX is a source device decoder for the NetworkHD 100 Series, an ultra low bandwidth H.264 AV over IP solution for distribution of point-to-point, one-to-many, and many-to-many AV distribution over a managed network. With simple system configuration and robust feature set, it provides the best value in networked video distribution.
The NHD-100-RX H.264 decoder is intended for use with an NHD-100-TX or NHD-200-TX H.264 encoder (sold separately) to provide a complete end-to-end video distribution system.
Ideal for the following settings:
- Hospitality
- Corporate
- Venues
- Retail
Specifications
- Video Resolutions (Max) Note: All source content must be progressive
- HDMI: 1920x1080p @60Hz 8bit (15m/50ft)
- Cat6/6a/7: 1920x1080p @60Hz 8bit (100m/328ft Point to Point)
- Encoding Data Rate: 2~30Mb/s
- End to End Latency 60~90 ms (Low latency mode) | 250~300 ms (High quality mode)
- Color Depth: 8bit
- Maximum Pixel Clock: 150MHz
- HDMI: HDMI | HDCP 1.4
- Ethernet: 1x 8-pin RJ-45 female | 10/100Base-T | PoE
- RS-232: 1x RS-232: 3-pin Phoenix
- Power Supply: 12V DC 1A
- PoE IEEE 802.3af | 12V 1A 12.95W
- Max Power Consumption: 6W (DC adapter)
- Rack Units/Wall Box: <1U
- Height: 1 inch
- Width: 8 inches
- Depth: 4 inches
- Weight: 2 lbs
- Warranty: 5 years